Cars In Ct Diy Oil Change
New car or pre owned cars in CT – they all need regular oil change at least every after 3000-5000 KM as measurement of their preventive maintenance. It’s a good rule to check all your fluids and reload every time you make an oil change. Your brake fluid, transmission fluid, power steering fluid, windshield wash and coolant all these things must be regularly checked and replaced if necessary.
Also, remember to check your air pressure in tires at least each 5000 KM. Today we’ll explain how to change the oil in your car and advise on the procedure.
Find your drain plug and get rid of it. You will have to use a wrench or socket and ratchet to do so. You will work under the car, you it is vital to make sure that your vehicle is secured or supported by a winch motor. Once the drain plug is removed, the oil flows rapidly in a stream the size of a dime. Be prepared to use a suitable container for capturing all the used oil. Please dispose of them properly at a service station or garage, do not pollute the environment. Replace the washer and seal around the drain plug. It costs only pennies and can save you time and long-term problems with your cars in ct.
Replace the drain plug with a new one. The new washer drain needs to be tightened much as possible but not too tight.
The next step is to find your oil filter and remove it with an oil filter wrench. Ready and catch the oil pan, because there will be a bit of oil left, but only a cup or less. Guarantee that the old oil filter gasket also comes out. Take your new oil filter and new oil is rubbed into the joint, which will make the filter easy to remove for the succeeding oil change. Place the new filter and tighten it as hard as you can.
Put new oil in the engine. Check the car manual to determine what oil type must be used and how many quarts. When the correct amount of oil is put in the car, change the oil cap. Now check the oil level by pulling the dipstick and wipe it off and put back in place. And viola, you are through with your oil change! Any type of cars in CT must undergo this procedure, irrespective of brand and model.
Related Car Oil Changing Articles
Car Oil Change Options
Although, the frequency of completing this task is fairly well shared among everyone; the option of where to get your oil cleaned out is completely up to you. You most likely will not need to go into a dealership to get this done. In fact, you can simply do it yourself or take it into a quick lube business of your choice.
In the US, there are probably a dozen or so large franchises that will change the oil in your vehicle; which is their specialty. The largest and most well know is Jiffy Lube. Two other locations that are also quite widespread are Firestone auto care centers and Valvoline Instant. There are plenty of other places, but these 3 are quite common in the US.
Jiffy Lube performs their signature service e across the country and is well known for their in and out service. Jiffy Lube is actually owned by Pennzoil, as it was purchased by them in 1990. Their Signature Service typically ranges in price from .99 to 49.99 depending on the specific services rendered.
Firestone Auto Care Services will also perform this regularly scheduled maintenance for you. Their prices are also very comparable to Jiffy Lube and depending on whether or not you are able to find any discounts. Firestone is typically known for their tires, but they will also perform basic vehicle maintenance services. Because of their specialty in tires, they will often include a free 4 tire rotation as part of the oil change service.
Finally, Valvoline Instant Oil also has hundreds of locations across the US that will perform this quick lube service. Valvoline has been around for a long time and will also perform the basic services performed at Jiffy Lube and Firestone; including the tire rotations if requested.
Overall, getting an regular oil change is important for the maintenance of your vehicle. It really doesn’t matter how you get it done; by yourself or through an business.
Learn How to Change Your Car Oil Yourself!
Learn How to Change Your Car Oil Yourself!
Changing the car oil it’s not so difficult as you might think. Anybody can do it! There for if you wish to economize just buy the oil and do it yourself!
1. Buy a good oil filter for your car!
A good oil filter means that it’s efficient in removing the carbon from the engine oil. Remember that is always better to spend a little more on a good oil filter than to replace the engine later on.
2. Choose an oil filter wrench!
The filter wrench should help you get the filter off the engine.
3. Remember to buy an oil container pan!
If you wish to recycle the old oil from your car don’t forget to bring with you an oil container pan. Be a good citizen and don’t just throw it away!
4. Get under the car!
Now you are ready to start changing the car oil. Get under the car using a car jack. Try not to depend only on the car jack when you are under the car. It might be dangerous!
5. Remove the oil fill cap!
You can find the oil fill cap normally on the calve cover. Make sure you remove it.
6. Place the oil container pan under the oil filter!
All the old oil will come in the pan. This might take up to 10 minutes. Take a short break and wait until the oil is totally out.
7. Place the new filter in the filter pipe!
Screw the new filter in the filter pipe using just your hands.
8. Put the car back on the ground!
Your job under the car is done. Now you can put the car back on the ground.
9. Add the new oil!
Now is time to add the new oil. Use just five quarts of the new engine oil.
10. Start the engine!
Start the engine but don’t force it. Wait until the light from the oil gets off. This will take a few minutes. Make sure also that the filter is not leaking.
Find More Car Oil Changing Articles